Coats Complex Shapes
The gas phase deposition process means that the coating crystallises uniformly across the surface of the part and can achieve full coverage of difficult to reach areas and complex geometries that cannot be coated by other treatment methods.
Hardide coatings can coat internal and complex shapes uniformly. The yellow areas illustrate where the Hardide coating can be targeted on the internal surface/s of a complex pump design.
Hardide CVD coatings can be used on internal surfaces and complex shapes impossible to reach using traditional methods.
Micro-photo of cross-section of M5 thread coated with 50 microns thick Hardide coating which follows the thread uniformly and evenly