English German Italian

UK: +44 (0)1869 353 830

US: +1 (713) 677-3504

Share
Coatings for Valves

Valves

Valves

Hardide coatings are particularly suitable for metal-seated ball valve applications.

Ball valves can suffer from abrasion by sand or stone chippings present in fluids and from erosion by accelerating flow when the valve is being closed/opened. Hardide CVD coatings make valve parts scratch-proof and capable of resisting abrasion and erosion. The coating is extremely effective in protecting ball valves from abrasion, erosion from flow acceleration and corrosive chemicals. The binder-free coating gives consistent coating thickness and reduces assembly costs. No matching of seats to valve bodies is required and the coating can be applied easily to internal surfaces and complex shapes enabling greater design flexibility. The smooth and uniform ‘as coated’ finish streamlines finishing operations which are carried out in-house giving faster turnaround times, improved quality control and traceability.

  • Technically comparable & better performing replacement for Stellite and hard chrome
  • FDA approved

Also suitable for:

  • Control valves
  • Diverters
  • Choke valves
  • Stem valves
  • Plug valves
  • Triple offset butterfly valves

In one example, the coating allows Flowserve to offer Type 316 stainless steel as the base metal for use in severe service applications that require metal-to-metal seating, including abrasive and slurry applications. In the Flowserve slurry tests, Hardide-coated 316 balls and seats remained operational after more than 70,000 cycles in slurry where a Co-Cr wear-resistant failed in 29,000 cycles.